Pre-Sales Service

waste liquid incinerator
scope of application:
High concentration of organic wastewater.
Product characteristics:
1. Good atomization effect: using Japanese atomization technology, with small atomized particle size and sufficient combustion.
2. No secondary pollution: low nitrogen combustion technology, smoke-free, no odor, no harmful gas.
3. High safety: flame monitoring system, complete alarm system, and no explosion consideration.
4. Low fault rate: imported parts, double-circuit system, good quality and long life.
5. Waste oil, waste liquid, waste solvent and organic waste gas can be treated well at the same time to reduce the operating cost.

organic waste gas incinerator
scope of application:
Industrial mixed exhaust gas; combustible exhaust gas, color paint paint exhaust gas; non-combustible exhaust gas that can be cracked at high temperature; toxic gas,
Dangerous and explosive gases, etc.
Product characteristics:
1. Multi-stage resistance tempering device.
2. Exsive control device.
3. Emergency discharge device.
4. The vortex street flow device is controlled by PLC.
5. Thermal energy recovery, and to reduce operating costs.

Heat-storage waste gas incinerator (RTO)
scope of application:
Painting, textile, pharmaceutical, chemical medium and low concentration, strong wind amount of organic waste gas;
The waste gas composition is complex, low calorific value, toxic and odor of harmful waste gas;
Due to different production lines on the same production line, the exhaust gas composition often changes;
The waste gas contains the components of the catalyst poisoning or activity decline (for example, mercury, lead, tin, zinc, arsenic, phosphorus, etc.).
Product characteristics:
1. Significant energy-saving effect, while reducing the number of greenhouse gas emissions.
2. Better heat exchange effect.3. Low combustion noise.
4. Improve the purification efficiency, and also prolong the furnace life.
5. Adopt graded combustion technology with good heating effect.Good environmental protection effect.
6. Complete organic oxide decomposition.

7. Adopt PLC automatic combustion control, with high degree of automation, stable operation, and high safety and reliability.

8. The heat energy recovery device can be reasonably set up according to the waste gas situation, and connect the heat conductive oil furnace or waste heat boiler in the high temperature combustion chamber. The low temperature flue gas is used to heat the waste gas and make full use of the waste heat.

solid waste incinerator
scope of application:
Industrial Waste (Polymer Waste) Plastic PE, PU, EVA, Rubber (Tire), Paulone, Porter, Bottle, Fiber, Foam, Cotton, cloth, resin, acrylic, Leather, Cattle Pander, Integrated Plate,
Electric wood powder, urea powder, vegetable melon cloth, audio tape, coating, polymerization
Things, etc.General garbage: cardboard, paper scraps, wood debris, leaves; screened community household garbage; hotel garbage; office garbage, etc.
Product characteristics:
1. Low investment and convenient operation.
2. Disassemble the secondary combustion with high heat, so ensure the complete combustion.
3. The inclined structure can prevent the reverse fire and release it easily.
4. Exquisite design, so the small space can also be installed.
5. Negative pressure design and operation safety.
6. Waste heat can be recovered for hot water or heating.

Heat control gas furnace
scope of application:
Medical waste, industrial hazardous waste.

Product characteristics:
1. Wide adaptability, and more prominent potential for large waste.Static pyrolysis, gasification and incineration of waste, small dust production greatly reduces the load of the subsequent exhaust gas purification section, and the discharge gas is colorless, tasteless and without black smoke.
2. After incineration, the waste volume will be reduced by more than 95, the ash treatment cost is low, and the ash discharge is non-toxic and harmless.
3. Incinate one loading, continuous incineration, reduce the operation labor intensity, and avoid the contact between operators and hazardous waste to ensure the operation safety.
4. The operation cost is low, and make full use of the heat generated by waste pyrolysis incineration to reach the design temperature.
5. High degree of automation, automatically adjust the air volume, and automatically adjust the combustion state of the burner according to the outlet flue gas temperature.

Rotary incineration furnace
scope of application:
1. Sludge type and paste waste treatment.
2. Centralized treatment of industrial waste.
3. Centralized treatment of medical waste.

Product characteristics:
1. Automatic feed, automatic ash discharge
2. Non-free, odorsmelly, no secondary public harm, dry and incineration, low operation costs.
3. The furnace body adopts rotating type, mixing and multiple combustion, with good firing effect.
4. Complete incineration, less gray amount, and caustic soda rate of more than 90%.
5. Continuous feeding, all kinds of high water content waste and a small amount of waste water (gas), etc., can be mixed into incineration.

Heat-storage waste gas incinerator (RTO)
scope of application:
Painting, textile, pharmaceutical, chemical medium and low concentration, strong wind amount of organic waste gas;
The waste gas composition is complex, low calorific value, toxic and odor of harmful waste gas;
Due to different production lines on the same production line, the exhaust gas composition often changes;
The waste gas contains the components of the catalyst poisoning or activity decline (for example, mercury, lead, tin, zinc, arsenic, phosphorus, etc.).
Product characteristics:
1. Significant energy-saving effect, while reducing the number of greenhouse gas emissions.
2. Better heat exchange effect.3. Low combustion noise.
4. Improve the purification efficiency, and also prolong the furnace life.
5. Adopt graded combustion technology with good heating effect.Good environmental protection effect.
6. Complete organic oxide decomposition.7. Adopt PLC automatic combustion control, with high degree of automation, stable operation, and high safety and reliability.8. The heat energy recovery device can be reasonably set up according to the waste gas situation, and connect the heat conductive oil furnace or waste heat boiler in the high temperature combustion chamber. The low temperature flue gas is used to heat the waste gas and make full use of the waste heat.